- Small dimensions (lxwxh = 42x39x60)
- Up to 20m3/hour
- Large return connections
- Inc. dirt discharge gutter
- Inc. lid
- Large screen element (32cm wide/47cm long)
- 2x75/110mm outlet
- 2x 63mm inlet
- 2x 75mm overflow protection
- 2x 63mm dirt discharge
- Connections on both sides
The SuperSieve pump is characterised by an ingenious design. It's construction allows connections to be fitted to both sides. Furthermore, the SuperSieve is made up of 2 parts:
- The pre-chamber into which the water is pumped
- The chamber where the screen element is located
The closed pre-chamber 'pushes' the water at right angles to the screen element. This improves dirt separation and increases the flow through the screen element. The water thus passes through the curved screen above the element so that water does not mix with dirt that has already been separated out. The design of the screen means that this separated dirt is pushed towards the dirt gutter.
The screen element is accurately sealed with specially manufactured rubbers on the housing itself so that no water (and thus no dirt) can pass through the screen element unfiltered. The housing is equipped with a lid to reduce the noise and slow down the growth of algae and bacteria on the screen element.
The housing has the following connections: an overflow protection, a dirt gutter with discharge and two 110mm discharges. The 110mm discharge dimension is particularly significant because it allows water to exit the housing quickly. The SuperSieve pump thus processes a good 20m3/hour with two 110mm outlets.
The SuperSieve pump is available in granite white and granite black.