SuperBead

How the SuperBead is rinsed
Every bead filter needs to be rinsed regularly to remove the dirt it has trapped. Unlike converted sand filters, the SuperBead was designed specifically for this rinsing process.
How it works
- After coarse pre-filtration, the water is pumped into the filter.
- The beads float to the top and trap particles as small as 5 microns.
- Biological filtration takes place on the surface of the beads.
- During rinsing, the trapped dirt is flushed out. Rinsing is easy to automate.
The hourglass shape of the SuperBead ensures a steady flow through the filter, an even spread of water over the filter bed, and effective rinsing.
Advantages of the SuperBead
- Energy-saving: high flow at low pressure, so it works with low-pressure pumps
- Crystal-clear water: effectively removes fine particles
- Stable biology: the gentle rinsing process does not damage the biofilm, and the filter has a high biological capacity
- Simple and reliable: easy to operate, with no electronics or parts that wear out
- Low maintenance: rinses quickly and uses little water
- Large connections
- Suitable for seawater
Pumps and energy saving
One of the biggest advantages of the SuperBead over other sand and bead filters is the low pump pressure it needs. This means you can use energy-efficient low-pressure pumps, such as the FalconFlow pumps. Converted sand filters often need two to four times as much pump power to move the same amount of water.
Installation
The SuperBead needs a pre-filter, such as the SuperSieve or the SuperDrum drum filter, except in indoor ponds. You can install the filter above or below water level, and also further away from the pond, as long as the pipes are the right size.
Because the filter is a closed system, installing it indoors causes no moisture, odour or insect problems. It can also be installed outdoors, as it has no electrical parts. All parts are made of plastic, so the SuperBead is suitable for seawater as well.
Automating the SuperBead
Automatic rinsing is one of the best ways to guarantee good water quality. The filter then rinses itself, for example every day, so dirt is removed daily without you having to do anything. If needed, you can connect a dirty-water pump that switches on during rinsing to pump the water from the SuperBead to the drain.
